Instructions for BAM48023 F-15C PASS conversion set for GWH

These instructions are laid out along what we consider the most efficient/logical construction flow, your approach may differ

Parts that simply replace the kit parts

  • Instrument panel and coaming

JFS exhaust

Corrected spine end panels

The kit upper fuselage needs be cut along the panel lines (shaded in red in the picture below) and the resin replacement part inserted from the inside. Note that this is a small correction and will be invisible to most observers 🙂

JHCMS Magnetic Tracking Unit (MTU)

This part should be glued inside the canopy on the canopy frame just forward of the large bracing

Example for the GWH kit

Front antenna reinforced framing

The self-adhesive vinyl frame should simply be placed around the existing panel ahead of the windshield