Straightening warped resin parts

3D-printed parts

If 3D- printed parts need straightening up, here is the procedure:

1. Clamp them on a straight surface
2. Heat them up with a hairdryer, not too hot and not for too long – proceed with caution not to burn yourself or damage the part
3. Let the part cool down while clamped

Resin parts

If resin-cast parts need straightening up, here is the procedure:

1. Clamp them on a straight surface
2. Place them in hot (not boiling) water for 5-10′
3. Let the part cool down while clamped

Fuselage preparatiominium) in position on the left aft part of the canoe